第一次使用AVR Studio软件时可能遇到的问题解决方法

English Version Notice（相关中文说明请参看第3页， please refer the third page for Chinese Version Notice）：Please do an activation when using the AVR STUDIO for the device the frist time, the steps as below:

It appears as the window when normal use:

<1> When appear the window above, please click the button <2> Then it appears the window as below:

OK”.

“

Please choose “STK500 or AVRISP”,”Auto”, then click “Disconnected Mode”.

<3> Pop up window as below:

Please click chip, click

.

, click drop-down menu , choose any type microcontroller

, choose ISP module, at last click

<4> When appearing the window as below, please click “确定” (It means “determination” or “OK”), then turn off the software. And it works well when you open the software again.

中文说明:在该编程器第一次使用时要先进行一次激活模式；激活步骤请按下述操作进行

正常使用时会出现以下界面

<1>当出现这个画面后 请点击 “OK”

<2>执行上述操作后会出现以下界面

该界面下选择”STK500 or AVRISP”，”Auto” 然后点击”Disconnected Mode”

<3>弹出界面如下

请点击再点击下拉菜单，任意选择一款芯片型号；然后点击

选择ISP模式；最后点击

<4>弹出下面界面后点击” 确定即可；然后关闭该软件，再重新打开即可进行正常的使用了

”