华为核心S7706把Telnet关闭开启SSH怎么做？求命令讲解，谢谢！
发布网友
共4个回答
热心网友
SECURECRT登录进去后
< HUAWEI-2F>敲 sys
进入 system view
关闭Telnet
[HUAWEI-2F]undo telnet server enable
[HUAWEI-2F]quit
< HUAWEI-2F>save
The current configuration will be written to the device.
开启ssh
[HUAWEI-2F]
[HUAWEI-2F]rsa local-key-pair create
The key name will be: HUAWEI-2F_Host
The range of public key size is (512 ~ 2048).
NOTES: If the key molus is greater than 512,
it will take a few minutes.
Input the bits in the molus[default = 2048]:
Generating keys…
……………….+++++
……………………++
….++++
………..++
[HUAWEI-2F]user-interface vty 0 4
[HUAWEI-2F-ui-vty0-4]authentication-mode aaa
Warning: The level of the user-interface(s) will be the default level of AAA users, please check whether it is correct.
[HUAWEI-2F-ui-vty0-4]protocol inbound ssh
[HUAWEI-2F-ui-vty0-4]qu
[HUAWEI-2F]ssh user admin
Info: Succeeded in adding a new SSH user.
[HUAWEI-2F]ssh user admin authentication-type password
[HUAWEI-2F]
[HUAWEI-2F]
[HUAWEI-2F]
[HUAWEI-2F]aaa
//有密码可以不用设置
[HUAWEI-2F-aaa]local-user admin password
Please configure the login password (8-128)
It is recommended that the password consist of at least 2 types of characters, including lowercase letters, uppercase letters, numerals and special characters.
Please enter password:
Please confirm password:
Please enter old password:
Error: The new password is the same as the old password.
[HUAWEI-2F-aaa]local-user admin service-type ssh
Info: After changing the rights (including the password, access type, FTP directory, and level) of a local user, the rights of users already online do not change. The change takes effect to users who go online after the change.
[HUAWEI-2F-aaa]qu
[HUAWEI-2F]
[HUAWEI-2F]
[HUAWEI-2F]
[HUAWEI-2F]ssh user admin service-type stelnet
[HUAWEI-2F]stelnet server enable
Info: Succeeded in starting the Stelnet server.
[HUAWEI-2F]quit
< HUAWEI-2F>save
热心网友
这是命令的方式出现了问题，太多的操作之类的命令你可以直接按照华为工程师的讲解来实际操作。
热心网友
更改方法: 1、准备好华为交换机和电脑 并且让你的电脑和交换机连接上
热心网友
产品手册上有啊，做aaa认证就行了
